Jeddah Tower
Jeddah
Note: As this project is under construction, the data is based on the most reliable information currently available. This data is thus subject to change until the building has completed and all information can be confirmed and ratified by CVU.
asgg.jpg){kind=link}
asgg.jpg){kind=link}
asgg.jpg){kind=link}
asgg.jpg){kind=link}
asgg.jpg)
asgg.jpg)
asgg.jpg)
asgg.jpg)
asgg.jpg)
ASGG.jpg)
- Facts
-
Metrics
You must be a CVU Member to view this resource.
Official Name
Jeddah Tower
Other Names
Kingdom Tower
Type
Building
Status
Under Construction
Expected Completion
2030
Country
City
Address
Function
A mixed-use tall building contains two or more functions (or uses), where each of the functions occupy a significant proportion of the tower's total space. Support areas such as car parks and mechanical plant space do not constitute mixed-use functions. Functions are denoted on CVU "Tallest Building" lists in descending order, e.g., "hotel/office" indicates hotel function above office function.
Residential / Serviced Apartments
Structural Material
Both the main vertical/lateral structural elements and the floor spanning systems are constructed from steel. Note that a building of steel construction with a floor system of concrete planks or concrete slab on top of steel beams is still considered an “all-steel” structure as the concrete elements are not acting as the primary structure.
All-Concrete
Both the main vertical/lateral structural elements and the floor spanning systems are constructed from concrete which has been cast in place and utilizes steel reinforcement bars and/or steel reinforced concrete which has been precast as individual components and assembled together on-site.
All-Timber
Both the main vertical/lateral structural elements and the floor spanning systems are constructed from timber. An all-timber structure may include the use of localized non-timber connections between timber elements. Note that a building of timber construction with a floor system of concrete planks or concrete slab on top of timber beams is still considered an “all-timber” structure as the concrete elements are not acting as the primary structure.
Mixed-Structure
Utilizes distinct systems (e.g. all-steel, all-concrete, all-timber), one on top of the other. For example, a Steel Over Concrete indicates an all-steel structural system located on top of an all-concrete structural system, with the opposite true of Concrete Over Steel.
Composite
A combination of materials (e.g. steel, concrete, timber) are used together in the main structural elements. Examples include buildings which utilize: steel columns with a floor system of reinforced concrete beams; a steel frame system with a concrete core; concrete-encased steel columns; concrete-filled steel tubes; etc. Where known, the CVU database breaks out the materials used within a composite building’s primary structural elements.
All-Concrete
Official Website
Height
1,000+ m / 3,281+ ft
Floors Above Ground
167
Floors Below Ground
2
# of Apartments
439
# of Hotel Rooms
200
# of Parking Spaces
2205
# of Elevators
59
Top Elevator Speed
10 m/s
Tower GFA
243,866 m² / 2,624,952 ft²
Construction Schedule
Proposed
Construction Start
Completed
Owner/Developer
Architect
Usually involved in the front end design, with a "typical" condition being that of a leadership role through either Schematic Design or Design Development, and then a monitoring role through the CD and CA phases.
Usually takes on the balance of the architectural effort not executed by the "Design Architect," typically responsible for the construction documents, conforming to local codes, etc. May often be referred to as "Executive," "Associate," or "Local" Architect, however, for consistency CTBUH uses the term "Architect of Record" exclusively.
Structural Engineer
The Design Engineer is usually involved in the front end design, typically taking the leadership role in the Schematic Design and Design Development, and then a monitoring role through the CD and CA phases.
The Peer Review Engineer traditionally comments on the information produced by another party, and to render second opinions, but not to initiate what the design looks like from the start.
MEP Engineer
The Design Engineer is usually involved in the front end design, typically taking the leadership role in the Schematic Design and Design Development, and then a monitoring role through the CD and CA phases.
The Peer Review Engineer traditionally comments on the information produced by another party, and to render second opinions, but not to initiate what the design looks like from the start.
Project Manager
The CTBUH lists a project manager when a specific firm has been commissioned to oversee this aspect of a tall building’s design/construction. When the project management efforts are handled by the developer, main contract, or architect, this field will be omitted.
The CTBUH lists a project manager when a specific firm has been commissioned to oversee this aspect of a tall building’s design/construction. When the project management efforts are handled by the developer, main contract, or architect, this field will be omitted.
Other Consultant
Other Consultant refers to other organizations which provided significant consultation services for a building project (e.g. wind consultants, environmental consultants, fire and life safety consultants, etc).
Other Consultant refers to other organizations which provided significant consultation services for a building project (e.g. wind consultants, environmental consultants, fire and life safety consultants, etc).
Material Supplier
Material Supplier refers to organizations which supplied significant systems/materials for a building project (e.g. elevator suppliers, facade suppliers, etc).
Material Supplier refers to organizations which supplied significant systems/materials for a building project (e.g. elevator suppliers, facade suppliers, etc).
You must be a CVU Member to view this resource.
Owner/Developer
Jeddah Economic Company; Kingdom Real Estate Development
Architect
Usually involved in the front end design, with a "typical" condition being that of a leadership role through either Schematic Design or Design Development, and then a monitoring role through the CD and CA phases.
Usually takes on the balance of the architectural effort not executed by the "Design Architect," typically responsible for the construction documents, conforming to local codes, etc. May often be referred to as "Executive," "Associate," or "Local" Architect, however, for consistency CTBUH uses the term "Architect of Record" exclusively.
Structural Engineer
The Design Engineer is usually involved in the front end design, typically taking the leadership role in the Schematic Design and Design Development, and then a monitoring role through the CD and CA phases.
The Peer Review Engineer traditionally comments on the information produced by another party, and to render second opinions, but not to initiate what the design looks like from the start.
MEP Engineer
The Design Engineer is usually involved in the front end design, typically taking the leadership role in the Schematic Design and Design Development, and then a monitoring role through the CD and CA phases.
The Peer Review Engineer traditionally comments on the information produced by another party, and to render second opinions, but not to initiate what the design looks like from the start.
Project Manager
The CTBUH lists a project manager when a specific firm has been commissioned to oversee this aspect of a tall building’s design/construction. When the project management efforts are handled by the developer, main contract, or architect, this field will be omitted.
The CTBUH lists a project manager when a specific firm has been commissioned to oversee this aspect of a tall building’s design/construction. When the project management efforts are handled by the developer, main contract, or architect, this field will be omitted.
EC Harris; Turner International LLC; Mace Limited
Contractor
The main contractor is the supervisory contractor of all construction work on a project, management of sub-contractors and vendors, etc. May be referred to as "Construction Manager," however, for consistency CTBUH uses the term "Main Contractor" exclusively.
Saudi Bin Laden Group
Other Consultant
Other Consultant refers to other organizations which provided significant consultation services for a building project (e.g. wind consultants, environmental consultants, fire and life safety consultants, etc).
Other Consultant refers to other organizations which provided significant consultation services for a building project (e.g. wind consultants, environmental consultants, fire and life safety consultants, etc).
Lee Herzog Consulting
Aegis Defence Services Limited
Fortune Shepler Consulting
Forcade Associates
Material Supplier
Material Supplier refers to organizations which supplied significant systems/materials for a building project (e.g. elevator suppliers, facade suppliers, etc).
Material Supplier refers to organizations which supplied significant systems/materials for a building project (e.g. elevator suppliers, facade suppliers, etc).
Aluminum Products Company
Dow; Guardian Glass; Jangho Group Co., Ltd.
Liebherr
BAUER Group
Global News
AmmarShaker.jpg)
04 June 2025
US-Based Contractor will Manage 1000+ Meter Jeddah Tower Project
Construction of the long-stalled Jeddah Tower—set to surpass 1,000 meters in height—has officially resumed, with U.S.-based Turner appointed as project manager. Turner previously managed the...
About Jeddah Tower
At the forefront of worldwide skyscraper activity, Jeddah Tower represents an unprecedented exercise that dares to go beyond the one kilometer threshold, a height that seemed only to exist in fantasy just years ago. Inspired by a bundle of leaves shooting up from the ground, it is meant to emanate the growth, prosperity, and regional emergence of its homeland on the global stage, a role that many of the world’s tallest buildings have played in their respective locales.
The multivariate form of the tower is rationalized by a “Y”-shaped plan and a continuously smooth taper, which will significantly reduce structural loads by obviating the need for the complicated outrigger transfers and belt trusses required in a setback approach. Furthermore, each wing of the tower will terminate at different heights, allowing them to taper at different rates and establish a distinct three-part spire. The supporting structure for the building is comprised entirely of cast-in-place reinforced concrete walls, coupling beams, and conventionally reinforced plate concrete floor framing. Due to the continuous and uninterrupted vertical nature of the walls, a highly efficient jump form system is utilized that will permit a continuous and uninterrupted construction process.
A series of balconies interrupt the smooth exterior, serving to provide both a cool outdoor element for occupants and shading for the tower’s surface, reducing direct solar radiation. Inside the tower, office floors are located at the bottom to take advantage of larger floor plates. These are followed by hotel, serviced apartments, and residential units of different sizes. At the very top, a massive penthouse will allow a tenant to reside at the crown of the building. Originally designed as a helipad, a circular sky terrace protrudes from one of the top levels, a feature that will be the highest of its kind in the world.
Global News
04 June 2025
US-Based Contractor will Manage 1000+ Meter Jeddah Tower Project
Construction of the long-stalled Jeddah Tower—set to surpass 1,000 meters in height—has officially resumed, with U.S.-based Turner appointed as project manager. Turner previously managed the...
Tahir__mq.jpg)
15 September 2023
Firms Race to Finish the World’s Tallest Tower in Jeddah
The company responsible for constructing the Jeddah Tower in Saudi Arabia has restarted work on the project and has compiled a list of contractors who...
Learn more about the Council on Vertical Urbanism
Discover how vertical living is shaping the next generation of urban environments. Explore insights, research, and global leadership in vertical urban development